Steel
1 - 6 of 6 Posts
There are no newo nes. You will need to buy used off ebay. Usually 150-190 each. Are you sure that is your problem? You will need a liitlle tool to align the magnet covers and you need to check all 4 magnets for leaks around the wiring inlet and plug. If you are tearing it down replace them . i can give you instructions and the tool at [email protected]
Joined
·
9 Posts
Just got off the phone with Dorman again as I was thinking the Engine valve timing Control valves for My 2008 Cadillac XLR platinum are made out of the country
Righr now they are a 90 day back-order again and I can do is hope they come in sooner
All I can do is wait and hope they come when they come in so anyone looking for them Dorman will have them but be patient
Robert Cook Jr AKA Steel
Righr now they are a 90 day back-order again and I can do is hope they come in sooner
All I can do is wait and hope they come when they come in so anyone looking for them Dorman will have them but be patient
Robert Cook Jr AKA Steel
Joined
·
9 Posts
Hello XLR Forum
It turns out that I do not need the VVT oil control vales well that is the way it looks anyway
I am changing VVT adjuster magnets and that should take care of the leak
Dam Vaden Cadillac in Savannah GA misdiagnose where the oil leak is coming from or just lied about it to get more money
What ever the case on good advice I am changing the adjuster magnet first
Thank you XLR Forum
Robert Cook Jr aka Steel
It turns out that I do not need the VVT oil control vales well that is the way it looks anyway
I am changing VVT adjuster magnets and that should take care of the leak
Dam Vaden Cadillac in Savannah GA misdiagnose where the oil leak is coming from or just lied about it to get more money
What ever the case on good advice I am changing the adjuster magnet first
Thank you XLR Forum
Robert Cook Jr aka Steel
1 - 6 of 6 Posts
