Cadillac XLR Forum banner
1 - 1 of 1 Posts

54 Posts
Discussion Starter · #1 ·
here's a fix for the majority of 'failure to retract' problems. The microswitch in the left bracket for the storage compartment divider seems to be the biggest culprit. The divider wants to pop out of its slot. Usually pushing it back in will resume top closure, but a pain in the ass. Simply open up the surround where the microswitch is, and cut the leads to the switch, and solder the two leads together. This bypasses the microswitch.
BUT, make damn sure nothings in the way of the stored top, the divider should be in place as before, but now it doesn't have to be PERFECTLY aligned in its slot.
No warranty expressed or implied.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.