[bion]

new oem have to be set up on a tech 2 to read their values and calibrate. This will be interesting for anyone needing some .Used cost a lot more and are "used" .

 

[bas15066]

We have experimented with a roof position sensor with a open at mid point. Did a calibration moving the roof manually and then rebuilt the sensor, the position reading matched the old one. The new potentiometer had higher tolerances. We then rebuilt the others and the values matched. The calibration isn't a big deal anyways.

 

[LeeB]

I can take apart your sensors and install brand new high quality electronics rated at 1,000,000 cycles. They are 100% match to OE. In most cases a relearn doesn't need to be performed. 1 for $200.00 plus $8.00 shipping.
The sensor case and wiring must be intact, get 2 or 3 rebuilt and get a discount, $20 for the second and $40 for the third.
Email me [email protected] for a number to send a text for inquiries

I can take apart your sensors and install brand new high quality electronics rated at 1,000,000 cycles. They are 100% match to OE. In most cases a relearn doesn't need to be performed. 1 for $200.00 plus $8.00 shipping.
The sensor case and wiring must be intact, get 2 or 3 rebuilt and get a discount, $20 for the second and $40 for the third.
Email me [email protected] for a number to send a text for inquiries

definitely keep that in mind next time