I have the plexiglass windscreen - which works great... but I find the reflective material to be annoying at night since headlights reflect in it.

I saw this today:

http://www.cadillac.com/cadillacjsp/model/accessory.jsp?model=xlr&year=2007

Which looks like a true OE windscreen - anyone know where I can order one or the part number?

Deadringer-

I have no idea of where to get the windscreen and noticed the same problem with the lexan one that I made.

I found that attaching it with velcro made it very easy to pop on and off. A 2" piece at the top of each roll bar and about 6" at each end of the bottom, near the roll bar, holds beyond 120.

Paul

It states that you must contact your dealer to order the windscreen. I will ask when I stop by my dealer. I would think about $300.
BobI have the plexiglass windscreen - which works great... but I find the reflective material to be annoying at night since headlights reflect in it.

I saw this today:

http://www.cadillac.com/cadillacjsp/model/accessory.jsp?model=xlr&year=2007

Which looks like a true OE windscreen - anyone know where I can order one or the part number?

Look back at my past post on modds to my xlr. I made the same looking screen myself. I can sell the same type screen for $100.00.plus shipping. (approx $5 or $6by ups. Thats a lot less than what the dealer will be getting. Any one interested let me know. I made mine 4 inches tall and it works great. With that heigth, you avoid getting the reflection back in the rear view mirror. Anyway, just an idea if anyone is interested. Bill (ocool)

Bill,
I agree that the area between the roll bars is the only area that needs blocking. I would think yours looks more professional, but the one from GM is black mesh, if I have seen this correctly. I copied the pic and blew it up but that didn't help much. I have a new back seat cover coming in shortly because I have a spot that started to wear after 4,000 miles from my wallet when I slide into my seat. I now position myself over the middle of the seat, which isn't easy and drop in rather tan drag my body in, so I shall have no more wear on the new seat back.
This was Tustin Cadillac that agreed it needed to be warranted.........cool?
So when I go in I will check out this windscreen.
Bob


Look back at my past post on modds to my xlr. I made the same looking screen myself. I can sell the same type screen for $100.00.plus shipping. (approx $5 or $6by ups. Thats a lot less than what the dealer will be getting. Any one interested let me know. I made mine 4 inches tall and it works great. With that heigth, you avoid getting the reflection back in the rear view mirror. Anyway, just an idea if anyone is interested. Bill (ocool)

Thats interesting, check it out and let me know if it's a mesh or what? I would think it fastens between the roll bars like mine also. It's probably professionally made, I'll be interested in how much they want for it. Keep us posted on what you find out. Bill

The price will be $625 (the cars are overpriced, why not the windscreen too?) but won't be available for another four to six weeks. The dealer didn't have any information about how they are attached or exactly what they are made of.

The price will be $625 (the cars are overpriced, why not the windscreen too?) but won't be available for another four to six weeks. The dealer didn't have any information about how they are attached or exactly what they are made of.

$625?! Good God!

This from the same company that told us a windscreen of any type was not needed (and would not help) on the XLR.

The reason the windscreen is coming out is from XLR owners like everyone on the forum that let their feelings known that they wanted one. So GM contracted with an engineering company to design one to be installed with a carry case when not in use.

It will be a mesh screen similar to the material that is on the deflector in front of the SRX sunroof when opened, thus allowing some air to pass through the unit. It will simply slide over the roll bars and secured with a buckel and snap design. It is a good looking piece and doesn't take away from the looks of the vehicle.

www.Cadillac-XLR.com (http://www.Cadillac-XLR.com)

Thank you
Allen

The reason the windscreen is coming out is from XLR owners like everyone on the forum that let their feelings known that they wanted one. So GM contracted with an engineering company to design one to be installed with a carry case when not in use.

It will be a mesh screen similar to the material that is on the deflector in front of the SRX sunroof when opened, thus allowing some air to pass through the unit. It will simply slide over the roll bars and secured with a buckel and snap design. It is a good looking piece and doesn't take away from the looks of the vehicle.

www.Cadillac-XLR.com (http://www.Cadillac-XLR.com)

Thank you
Allen

So its really going to cost $625?! I thought you just said that GM was *listening*! :D

They may "listen", but do they "learn"???

Do you remember the name of the company and could we maybe look them up on the E and get them cheaper. And while I'm at it, why do all the cheap cars have these and cold/warm cup holders and I-pod connections and we pay outrageous prices for this damn car that just wouldn't start today and they have no clue as to why not and still cannot get it started. Mechanics my ass.
This from the same company that told us a windscreen of any type was not needed (and would not help) on the XLR.

Bob:

I sure wish MY WALLET was fat enough to cause a wear spot on my interior!!!!

Regards

Funny thing...........my cash goes in my side pocket. It's all those gift cards, credit cards, health cards, carwash cupons, "Very little", black book and stuff like that.Bob:

I sure wish MY WALLET was fat enough to cause a wear spot on my interior!!!!

Regards

I also have a plexi glass screen that is maddening wit the reflexion and shadows., I ordered one of these windscreens from the dealer they want $850.00 where did you see $625.00. Also when I spoke to the parts guy he never heard of the windscreen I knew more about it then him anyway it has been a month since I ordered it, still no windscreen???? I did read a post down lower that it was'nt coming out until 6 to 8 more weeks so looks like May ??

I also have a plexi glass screen that is maddening wit the reflexion and shadows., I ordered one of these windscreens from the dealer they want $850.00 where did you see $625.00. Also when I spoke to the parts guy he never heard of the windscreen I knew more about it then him anyway it has been a month since I ordered it, still no windscreen???? I did read a post down lower that it was'nt coming out until 6 to 8 more weeks so looks like May ??

do you have a wear spot on your seat too?:rolleyes

The GM windscreen is mesh, not plexiglass. The dealer looked up the price and, as I said previously, it should be available in four to six weeks.

http://smileys.smileycentral.com/cat/8/8_3_17.gif (http://www.smileycentral.com/?partner=ZSzeb001_ZS) I'm slowly catching on to your wit................That's to funny. $850? Lots of luck
A screen door would be cheaper
do you have a wear spot on your seat too?:rolleyes







http://www.smileycentral.com/sig.jsp?pc=ZSzeb112&pp=ZS (http://smiley.smileycentral.com/download/index.jhtml?partner=ZSzeb112_ZS&utm_id=7920)

The reason the windscreen is coming out is from XLR owners like everyone on the forum that let their feelings known that they wanted one. So GM contracted with an engineering company to design one to be installed with a carry case when not in use.

It will be a mesh screen similar to the material that is on the deflector in front of the SRX sunroof when opened, thus allowing some air to pass through the unit. It will simply slide over the roll bars and secured with a buckel and snap design. It is a good looking piece and doesn't take away from the looks of the vehicle.

www.Cadillac-XLR.com (http://www.Cadillac-XLR.com)

Thank you
Allen

Allen, will it be the same nylon mesh that they use for the Saabs? The price doesn't surprise me, the Saab screen was $550

Does any one have the GM Part number for this windscreen?
Are there any better photos of it anywhere?

motorboat

I also have a plexi glass screen that is maddening wit the reflexion and shadows., I ordered one of these windscreens from the dealer they want $850.00 where did you see $625.00. Also when I spoke to the parts guy he never heard of the windscreen I knew more about it then him anyway it has been a month since I ordered it, still no windscreen???? I did read a post down lower that it was'nt coming out until 6 to 8 more weeks so looks like May ??

I am off to Home Depot tomorrow for some plexiglass; if it looks like crap when I'm done then I will drop it off at the upholstery shop and have it covered in fine Corinthian leather. If it still looks like crap I have a large trash can.

If Cadillac is listening and is offering this product based on customer request then we owe it to them to buy it. :glol

Then we can start requesting / hounding GM for all the things the car lacks like Bluetooth and MP3.:mad

You are assuming they are listening? What a jokeI am off to Home Depot tomorrow for some plexiglass; if it looks like crap when I'm done then I will drop it off at the upholstery shop and have it covered in fine Corinthian leather. If it still looks like crap I have a large trash can.

If Cadillac is listening and is offering this product based on customer request then we owe it to them to buy it. :glol

Then we can start requesting / hounding GM for all the things the car lacks like Bluetooth and MP3.:mad

They are listening alright!

Few retailers would have the Ka-ho-nays to charge what GM would for a $10 mesh windscreen; that's why you see so few custom options for the XLR.

Corsa emailed me a couple of months ago saying the XLR-V system would be ready soon. Yesterday they told me it's not even on their to-do list! They suggested I call Mallet. I did, was told they just installed one on a V and would call back with the details and pricing. Haven't heard a word from them.

My real point from the last post was that I bet I can build a better mousetrap for next to nothing!:flag

Happy Easter to all!

I still like my idea of a screen door and some bungy straps for $69.95They are listening alright!

Few retailers would have the Ka-ho-nays to charge what GM would for a $10 mesh windscreen; that's why you see so few custom options for the XLR.

Corsa emailed me a couple of months ago saying the XLR-V system would be ready soon. Yesterday they told me it's not even on their to-do list! They suggested I call Mallet. I did, was told they just installed one on a V and would call back with the details and pricing. Haven't heard a word from them.

My real point from the last post was that I bet I can build a better mousetrap for next to nothing!:flag

Happy Easter to all!

Hey Folks-

It's been busy so I haven't had a chance to participate much lately.

I took Bill's (OCOOL) idea and expanded it after seeing an Audi convertible with a broader plexi screen and made my own.

Home Depot only had very thin sheets so I went to a local glass place and bought a sheet of clear acrylic that is 1/4" thick.

I spent a little time laying things out and scribed it to the curvature of the back deck and the shape of the roll bars. It is slightly higher than the bars and sticks up high enough to block a lot of the wind. We spent some time driving around with a tape measure to figure out where the breakpoint of the recirculation was...

I used a carbide grinder to make the major cuts and then used a belt sander for the final shaping and chamfering of the edges. Yes, I probably have too much time on my hands.

The final step was to attach it to the car. Instead of a permanent installation we used adhesive backed velcro. A two inch piece for each roll bar at the top and 4" on each end under the roll bar to hold the bottom. On the acrylic I ran the soft, loop side, of the velcro the full length of the contact area of the deck as a buffer so it couldn't scrape it up.

The final result is great! A significant reduction in ****pit backdraft, an installation with a material that will not mark or mar the interior if it is removed, and best of all the deflector can be taken off and put in the trunk when the top is up! Yes, you have to take it out before putting the top up. :)

Have fun!

Paul

Hey Folks-

It's been busy so I haven't had a chance to participate much lately.

I took Bill's (OCOOL) idea and expanded it after seeing an Audi convertible with a broader plexi screen and made my own.

Home Depot only had very thin sheets so I went to a local glass place and bought a sheet of clear acrylic that is 1/4" thick.

I spent a little time laying things out and scribed it to the curvature of the back deck and the shape of the roll bars. It is slightly higher than the bars and sticks up high enough to block a lot of the wind. We spent some time driving around with a tape measure to figure out where the breakpoint of the recirculation was...

I used a carbide grinder to make the major cuts and then used a belt sander for the final shaping and chamfering of the edges. Yes, I probably have too much time on my hands.

The final step was to attach it to the car. Instead of a permanent installation we used adhesive backed velcro. A two inch piece for each roll bar at the top and 4" on each end under the roll bar to hold the bottom. On the acrylic I ran the soft, loop side, of the velcro the full length of the contact area of the deck as a buffer so it couldn't scrape it up.

The final result is great! A significant reduction in ****pit backdraft, an installation with a material that will not mark or mar the interior if it is removed, and best of all the deflector can be taken off and put in the trunk when the top is up! Yes, you have to take it out before putting the top up. :)

Have fun!

Paul


Paul,

Sounds like you went about things in a very meticulous manner! Can you post any pictures or diagrams to show your final creation?

Fred

I would be glad to, first I have to wait for the weather to clear so that I can wash and polish before the photos are taken!

I'm already embarrassed enough that Ocool saw it all dusty last week!

Paul

It looked fine paul, it was great meeting you and look forward to having you over for the exotic car show next week at celebration. As long as it does the job, it was worth the effort. I'm in the process of installing a back up camera, I'll let you know how it comes out. Bill (ocool)

Neat, so the back up camera takes pictures of you backing up? :) I guess it's better than the photos the police take of me going forward...

well paul, I bought the camera and monitor but didn't like it so i returned it. The more I thought about it, the cars not that big and seeing behind is not a problem, especially with the back up sensors. See you on the 21st for the exotic car show at Celebration. Remember, we're meeting at 10 am saturday at Hunters Creek.
Bill (ocool)

Although we're interested in back up cameras and such, we would like to bring this post back onto its original track which is the Cadillac sanctioned XLR windscreen. Has anyone purchased it and, if so, what has the experience been with it? Sandra is adamant that the $600 cost is well worth it, if we don't have to wear our Mr. XLR ball caps to keep the hair out of our faces while driving with the top down.

Best regards,
Ed of Ed and Sandra

I spoke to the General Motors ADI accessories guy the other day (he was visiting Hendrick Cadillac) and he stated there was no windscreen available and did not know about anything being developed. He further went on and said that if I had to have one I might try to make the Corvette mesh one work although it would have a Corvette logo.

I mean how difficult is it, if GM is already making a Corvette version, to modify and make one for the GM flagship division. Sheesh....this is not rocket science, or is it? :banghead

Here's the Cadillac website showing the windscreen the will be available for $625 in the next four weeks or so:

http://www.cadillac.com/cadillacjsp/model/accessory.jsp?model=xlr&year=2007

Hmmm, we're wondering what sort of deal on the windscreen Mr. XLR (Allen) might offer registered XLR Forum members. Allen, when you see this post if you don't want to comment publicly, please send us a private message or email.

Best regards,
Windblown Ed and Sandra

Mr. XLR "Allen",
I would be interested in one also.
If you need to email I think you have it and all my phone numbers also.

Thanks,
Blaise "motorboat"

The GM parts number for the windscreen is 1915 3868. That's the good news. The bad news is that no dealer in the country has one yet and may not for another four to six weeks.

Hi Allen, I also would purchase a windscreen if you could make a deal on the price. Reguards, Tim

For all that have asked my assistance in helping with this issue, I will assure you that as I get correct and factual information regarding timing and cost from Cadillac, I will let everyone know.

www.Cadillac-XLR.com (http://www.Cadillac-XLR.com)

Thank you
Allen

The GM parts number for the windscreen is 1915 3868. That's the good news. The bad news is that no dealer in the country has one yet and may not for another four to six weeks.

GMpartsdirect.com has it for $516 - http://www.gmpartsdirect.com

I don't know if its shipping yet, but they list it... the other online GM parts dealers I use don't list the part # yet.

Just wanted to give everyone an update as to the progress of the mesh windscreen. The Windscreen is slated to be available to coincide with the start up of the 2008 model.

It should be available to get on or about the begining of August.

www.Cadillac-XLR.com (http://www.Cadillac-XLR.com)

Thank you
Allen

Thank You Allen
Just wanted to give everyone an update as to the progress of the mesh windscreen. The Windscreen is slated to be available to coincide with the start up of the 2008 model.

It should be available to get on or about the begining of August.

www.Cadillac-XLR.com (http://www.Cadillac-XLR.com)

Thank you
Allen

I wonder if they will have any of them on hand to show us or better yet sell us if we go to the plant in August?
It would be great to test them on the way back home...:party

motorboat

Maybe a group discount for testing?I wonder if they will have any of them on hand to show us or better yet sell us if we go to the plant in August?
It would be great to test them on the way back home...:party

motorboat

As an accessory item the plant has nothing to do with it. The chances are very remote that there would be any vehicle at the plant that would ever see the windscreen. It is the same scenerio with the 15 spoke high polished 18" XLR wheel.

The windscreen is an accessory item, it is not considered an original equipment product.

www.Cadillac-XLR.com (http://www.Cadillac-XLR.com)

Thanks
Allen

Well if they are going to hold it up till they bring out the 2008's in August and we will be at the plant then would it not be a good place to show it off? No matter who makes it.
Allen maybe you could find out for us " I am sure you could" who is making it and have them come to the plant and join us and bring some or at least one.

I know the windscreen is not made at the BG plant but maybe seeing as they will have a lot of people there looking that the plant and hopefully the new 2008 XLR, & XLR-V's this would be a great time for them to show it off and get some photos of it on a lot of cars at the same time.
They could make some fast sales and STILL bring it out with the 2008's..

Come on Allen we know you can do this for the group....:rolleyes :thumbs

Thanks
Blaise

Talked to my dealer who talked directly to Cadillac today. The windscreen has now been delayed to mid-October. That's perfect timing for driving with the top down during the winter months. Way to go GM!

Talked to my dealer who talked directly to Cadillac today. The windscreen has now been delayed to mid-October. That's perfect timing for driving with the top down during the winter months. Way to go GM!

paint it black and tape it down with duck tape before I'll spend $516 (partsdirect price?) or more for a $10 part.

I actually made a plexiglas screen but can't find a nice rubber or plastic edge to apply around the plexiglas edge to give the velcro a little more grabbing room. So it sits in my garage.

Somewhere it was suggested a Corvette windscreen would work but it has a logo. Can the logo be removed or better yet manufacture a run without the Corvette logo? Or maybe it won't fit at all; probably won't.

Sorry for all the sour grapes I share on this forum but buying mods (wheels, exhaust, MP3, whatever) takes waaaaaaaaay to much effort. I love my V but the exclusivity is killing my enthusiasm!

IBMBROKER,
How thick is the plexie glass you used? I have found that door edge molding, available in many colors at your local auto store works great for a finished edge look.

Allen

I'll cut a piece of plywood,... paint it black and tape it down with duck tape before I'll spend $516 (partsdirect price?) or more for a $10 part.


:iagree

To put all the speculation to bed, I have been on the phone with the GM Accessories Manager for the last hour discussing the windscreen. I have had the complete installation instructions for the upcoming screen for some time.

A tremendous amount of time went into engineering this piece, The roll bar covers are even stiched for an elegant touch. Unlike the Corvettes screen that must be removed when the top is raised, the XLRs screen will be mounted where you can leave it on permanantly if so desired. There is also a cadillac storage bag for the folded unit to tuck nicely into the luggage area if so desired.

The timing issue has to do with the desired high quality that GM told the vendors that the windscreen must meet, The suppliers of the unit are working to make a world class operating screen as well as have the elegant look for the XLR client.

As to the release of the item, there is no specific time release at this point other than if the suppliers come up with the quality levels that must be for an XLR, we should be looking into late Summer.

www.CadillacXLR-V.com (http://www.CadillacXLR-V.com)

Thank you
Allen

IBMBROKER,
How thick is the plexie glass you used? I have found that door edge molding, available in many colors at your local auto store works great for a finished edge look.

Allen

I found a small sheet (24" x 30" or close to that, plenty to make a couple more screens) near the window dept at Lowes. The best part of it was a corner was chipped on it so the guy marked it down to $5!!

It is 1/4" clear and the edges were already finished so when I cut the plexiglass I made sure the finished edge was on top.

My father in law also suggested door edge molding, have to try the auto parts store. Thanks for the lead!

I forgot to mention in my last post that even though the GM windscreen is pricey; thanks should go out to Mr. XLR for taking time to deal with GM and pass along what he has learned. From his last post it sounds like it is worth a good bit more than the $10 I said it was probably worth!

I'm still burning from the fact that so little is available for the XLR-V, need to mind my manners when something does become available...even if its now OCTOBER!!!

When this windscreen becomes available I will post my plexiglass windscreen for sale very reasonable. I will mention that it attracts dust and needs to be cleaned weekly. I have tried different liquids, mentioned by fellow posters to keep this from happening but it still draws dust.I forgot to mention in my last post that even though the GM windscreen is pricey; thanks should go out to Mr. XLR for taking time to deal with GM and pass along what he has learned. From his last post it sounds like it is worth a good bit more than the $10 I said it was probably worth!

I'm still burning from the fact that so little is available for the XLR-V, need to mind my manners when something does become available...even if its now OCTOBER!!!

I can remember being told the XLR would not profit from a windscreen since it was so well engineered.

Golly, wonder who told me that??????

http://www.xlrforum.com/showthread.php?t=443&highlight=windscreen

All about the good old $$$$$$$.
All someone has to do is push the visor toward the front and it blocks half the wind coming in. In GM's infinite wisdom not to block the top from seating properly they designed the visors to lay down...................Here is your culprit.........TRY IT:nopity
PS Anyone have any ideas as how to change this?
Speaking of cold & warm cup holders, I have Tustin Cadillac seeing if they can use the Escalade holders in my V. I need a trick your ride place really bad. OK I'm bored.
I can remember being told the XLR would not profit from a windscreen since it was so well engineered.

Here's some pictures of a windscreen my wife and I made for my V. It's a solar mesh material that is held down by velcro strips. I had to put some velcro around the roll bars but it didn't hurt the looks around the bars, if anything it added a "trim" around them.

http://forums.corvetteforum.com/photopost/direct_data/1121/windscr_Small_.jpg

http://forums.corvetteforum.com/photopost/direct_data/1121/windscr3_Small_.jpg

http://forums.corvetteforum.com/photopost/direct_data/1121/windscr2_Small_.jpg

It really seems to help with the wind whipping around behind your head.

:nodno
I hope cadillac comes out with that screen soon
owners seem to be getting desperate

:nodno
I hope cadillac comes out with that screen soon
owners seem to be getting desperate

It’s not desperate, it’s innovative. Just another mod to the car.

Dude, I totally applaud his ingenuity... but man, I'm cracking up over here. :D

As posted by Mr. XLR not that long ago.............

Quixotic
Thanks for the intro, Early on about 3 years ago I asked that question regarding the need for a wind buffeting screen for the XLR. The answer came back quick & simple, Since most of the convertibles have either a back seat or a jump seat that would allow air to flow downward causing a vortex. To help eliminate that a wind screen is desireable.

The bottom line is since the XLR is a true roadster and there is no rear section to cause that wind circling possibility a screen is NOT recomended. Actually any type of a barier would change the air flow that the car was designed around changing the XLR's dynamics.


So, I have to wonder why at this late stage in the car's marketing is Cadillac getting around to supplying their own windscreen at a price one can only define as ludicrous?? I don't care what anyone tries to tell you; there is no possible way the product can be worth that kind of price. This is not rocket science, others have been building similar products for many years for a heck-of-a-lot-less money.

You guys know me..............Please take that off before people think your trying to catch fish. That's just plain ugly but I do applaud your ingenuity

As posted by Mr. XLR not that long ago.............

Quixotic
Thanks for the intro, Early on about 3 years ago I asked that question regarding the need for a wind buffeting screen for the XLR. The answer came back quick & simple, Since most of the convertibles have either a back seat or a jump seat that would allow air to flow downward causing a vortex. To help eliminate that a wind screen is desireable.

The bottom line is since the XLR is a true roadster and there is no rear section to cause that wind circling possibility a screen is NOT recomended. Actually any type of a barier would change the air flow that the car was designed around changing the XLR's dynamics.


So, I have to wonder why at this late stage in the car's marketing is Cadillac getting around to supplying their own windscreen at a price one can only define as ludicrous?? I don't care what anyone tries to tell you; there is no possible way the product can be worth that kind of price. This is not rocket science, others have been building similar products for many years for a heck-of-a-lot-less money.

I think we all knew even then that a wind screen would be useful,
as Quixotic and others were able to demonstrate with the 'wind baffel'.
Cadillac should have had one out within the first year, but I get the impression
they don't even have someone to build it yet.

Hey All-

You know that I often take a different tack, maybe we're just not getting it. My wife has long hair and even with the baffle still doesn't like driving with the top down. But then, she wouldn't drive the Z with the t-tops out either. Are we all worrying about something that is just part of having a convertible?

No top = windy.

This isn't my first convertible and I've never been in one that wasn't breezy inside, that's the point. Maybe we should just drive with the top up when the Missus is along for the ride! :)

Of course my opinion on this will change once my combover gets longer...

Are all of you not satisfied with the ones you made for yourself or the ones that are out there on the net? I have built things over the years that I have used in my business. This doesn't seem to difficult. I've used Lexan for years. It can be heated and molded. I'm new to the XLR, and only been on two road trips with it. But I have experienced what your talking about. There is one offered on the net called Winddeflector. Is this not a good working screen?

I have one in the garage that I don't use.
This one is the Wind Baffle...
I did not fine that it helped that much.
If anyone would like it I will sell it for $20.00 plus frt.
The last time I looked at it there was only a very small scratch in it but if anyone wants it I will clean it again and get back to you and the condition of it now.

motorboat

Just sent you an email! I'll take that sucker! :thumbs

I am seeing more of the "Black Screen" type of wind breakers on cars. I am about to go to Mecedes and see if they have one that will work and is any less expensive.

I wonder how well you can see through that screen door, especially at night
bobI am seeing more of the "Black Screen" type of wind breakers on cars. I am about to go to Mecedes and see if they have one that will work and is any less expensive.

I am seeing more of the "Black Screen" type of wind breakers on cars. I am about to go to Mecedes and see if they have one that will work and is any less expensive.

I tried mercedes....nothing comes close:nodno

BMW maybe?

I wonder how well you can see through that screen door, especially at night
bob

Better than all the reflections off the clear plastic one at night.

In that case I will add that to my wish list. I just have to have a ghost writer to correct my list and hand it in at Bowling Green so I don't embarrass everyone.
BobBetter than all the reflections off the clear plastic one at night.

I wonder how well you can see through that screen door, especially at night
bob

I had one on my Saab and preferred it to the clear ones. I hoped GM would use the same supplier.

I had one on my 1988 MB 560SL and it worked very well.
One of the things you could do was lay it down if you wanted to get the back draft.
I don't think that will work on the XLR though because this one will set higher and there is not that much room to lay it down.
I did not have any problem seeing thru it day or night.

Blaise

XLR WindScreen
For those that had read this previously, I am reposting it. As an aaded touch, if you have not seen the XLR WindScreen, simply go to
www.XLRgiftBoutique.com (http://www.xlrgiftboutique.com/) and you will get a good look at it on the main home page.
__________________________________________________ __________________

A tremendous amount of time went into engineering this piece, The roll bar covers are even stiched for an elegant touch. Unlike the Corvettes screen that must be removed when the top is raised, the XLRs screen will be mounted where you can leave it on permanantly if so desired. There is also a cadillac storage bag for the folded unit to tuck nicely into the luggage area if so desired.

The timing issue has to do with the desired high quality that GM told the vendors that the windscreen must meet, The suppliers of the unit are working to make a world class operating windScreen as well as have the elegant look for the XLR client. I have had the complete installation instructions for the upcoming WindScreen for some time.

As to the release of the item, there is no specific time release at this point other than if the suppliers come up with the quality levels that must be for an XLR, we should be looking into late Summer.

www.Cadillac-XLR.com (http://www.cadillac-xlr.com/)

Thank you
Allen

Allen, It just begs to be asked..........What will be the price range of the windscreen?

Ken,
As of now the exact pricing has not been set, but I would look to the 600.00 plus range. When I hear the exact number later this week, I will post it.

Thanks
Allen

Those of us who are going to Bowling Green will more than likely see the screen there and be able to buy one.

If it works????? I would like to be first on the list to get one when at BG..
Then I can use it on the drive back...
I wonder if they will let us try it out a round town first???

Blaise

Blaise.................and the luggage goes where?:cheers If it works????? I would like to be first on the list to get one when at BG..
Then I can use it on the drive back...
I wonder if they will let us try it out a round town first???

Blaise

Bob,
As you know there is not very much room for luggage anyway so I am trying to see if we can put our nicer clothes in one hanging bag that will fit UNDER the top when it is down. "Hope the bag does NOT melt" :eek

I got two of the leather bags MR. XLR sells that fit very nice in the space GM gives to store stuff in and will try and "roll" up everything else and put in those.
I have been told if you roll your clothes up they will look better then if you try and fold them when you have to use smaller luggage. My wife is NOT to sure about this.:leaving

We have two small coolers that will hold 6 can drinks each plus frozen ice bag that we will put just in front of the seats so we have the drinks covered.
To bad I could not come up with a way to cool the drink holder in the console....:confused

MR. XLR said that the new windscreen would still fit under the top when it was up so I don't have to store that on the way back. I will not have to store that till later or maybe never.
I had a windscreen made of metal and wire mesh on my MB that would fold down behind its self so IF you wanted more wind you could just push it down or reach back and pull it up to stop the air flow. Kind of nice having it both ways without having to remove it.;)

We are looking forward to meeting up with guys in West Memphis and going onto BG you all.
Not long now....:party

Blaise

Well unless things change, the Windscreen should be $625.00 plus taxes. Please keep in mind. This is being brought out earlier to accomodate the BG drive, so there can always be a few miscommunications regarding the pricing.
Allen

XLR WindScreen
For those that had read this previously, I am reposting it. As an aaded touch, if you have not seen the XLR WindScreen, simply go to
www.XLRgiftBoutique.com (http://www.xlrgiftboutique.com/) and you will get a good look at it on the main home page.
__________________________________________________ __________________

A tremendous amount of time went into engineering this piece, The roll bar covers are even stiched for an elegant touch. Unlike the Corvettes screen that must be removed when the top is raised, the XLRs screen will be mounted where you can leave it on permanantly if so desired. There is also a cadillac storage bag for the folded unit to tuck nicely into the luggage area if so desired.

The timing issue has to do with the desired high quality that GM told the vendors that the windscreen must meet, The suppliers of the unit are working to make a world class operating windScreen as well as have the elegant look for the XLR client. I have had the complete installation instructions for the upcoming WindScreen for some time.

As to the release of the item, there is no specific time release at this point other than if the suppliers come up with the quality levels that must be for an XLR, we should be looking into late Summer.

www.Cadillac-XLR.com (http://www.cadillac-xlr.com/)

Thank you
Allen

Mr. XLR

The picture on your site is of a black windscreen, which works well with the silver and black XLR. Mine is Silver and Brown. Is there going to be a windscreen to match the shale interrior as well as one for the ebony, or is black the only choice?

Ben

No, Since all 2006 and newer XLRs have all the uppers in ebony, I am sure that the Windscreen that is coming out to coincide with the 2008 model will be in the ebony tone. But I already made a call to verify.

www.Cadillac-XLR.com (http://www.Cadillac-XLR.com)

Thanks
Allen

could some kind member trace there currect windscreen pattern on a piecetry and of paper or cardboard for me so I can make my own? It will save a ton of time if I have a base line to start from. Thanks send to Rest.Unl. Inc box "V" Elizabethville, PA 17023 thanks again jim

Jim,
If I buy one at BG, I'll sell you my good plastic one for $100.
Bobcould some kind member trace there currect windscreen pattern on a piecetry and of paper or cardboard for me so I can make my own? It will save a ton of time if I have a base line to start from. Thanks send to Rest.Unl. Inc box "V" Elizabethville, PA 17023 thanks again jim

For those who did not attend the BG Rendezvous and saw the new XLR WindScreen, it is now available exclusively through the XLRgiftBoutique. Since the boutique is exclusive to the XLR Cadillac felt it was the best place to market the windscreens through them.

Yesterday, they sent out emails to their XLR merchandise customers and over 1/2 of the available windscreens were sold in less than 6 hours. I was told today that the initial shipment of windscreens are already at the XLR Gift Boutique and subsequent shipments will not start until the November time frame.

Due to the very limited availability of the windscreens the pricing is the same selling price as it was at the BG Rendezvous. The list price is 775.00 and the selling price is $625.00.

I wanted to let everyone have the oportunity that wasnt at the event to still have a chance to get one. On their site are photos and descriptions of how the windscreen looks and is installed on the XLR.

you can go to their site at www.XLRgiftBoutique.com (http://www.XLRgiftBoutique.com)

thank you
Allen

Over 2 years ago I worked pretty close with Cadillac on the Wind screen issue. There were so many people that owned XLRs that called or emailed me,, as well as forum members asking for a screen that I asked Cadillac to revisit the issue.

Yes, when the car was originally designed in 2002, I was told they looked into incorporating a screen if it did a substantial job in cutting down on wind buffeting they could possibly design it into the vehicle.

The word came down that there was not a sizeable enough reduction in air flow in the vehicle to justify the cost involved. As we all know the people that have used a wind screen on many types of convertibles have all agreed that it reduces air flow.

With this information in hand,, GM Accessories started to search out suppliers to develop a wind screen that could be easily installed look professional and reduce wind flow.

GM and their suppliers agreed that the mesh design that was on some wind screens and on the front edge SRXs ultra roof was proven to deflect air, while allowing some to pass through the material. This would greatly help on the potential reduction of noise that some times come from a hard surface. The mesh would also have an impact on less glare from oncoming lights.

With all the above decided, GM went to source a mfg for the screen. Without going into all the GM supplier guidlines and rules,, they landed on this company in Europe that currently produces screens for Mercedes and other companies.

These companies make their money by producing large volumes of products, and it is proven that less than 3% of owners put any customization on their cars. Some cars the number is higher and some it is less. It is also very regional as well. When you take that in to account the number of XLRs sold per year about 2,000 they would be looking at a very small amout of screens to be produced. Even if the number was off the charts at 10% thats still only 200 per year. Yes, there would be some people that had older vehicles that would purchase a screen,, but you would still only be talking about a very small amount of products sold.

The number they came up was much higher than the screen sells for,, production was actually delayed for months as the original supplier would not produce the screen for the cost that was agreed to with GM. So back in 2007,, they switched suppliers and was able to get a few made for RII. The current supplier produces them on a very limited basis, as the production volumes are very low, thus adding up to the price it is. The full list is just under 800.00. but GM has asked that the screen be sold in the 600/700 range.

There has been so much talk regarding the value of the screen, I thought I would shed some light on what it took to get the screen to production, and how the XLRs low volume has a direct impact on how an item is priced by GM and it's European mfg that makes it for them.

Thanks
Allen